Fukuoka Fully Synthetic GOLDsyn 10W40 SN

    Fukuoka Fully Synthetic GOLDsyn 10W40 SN



    FK Fukuoka ® GOLDSyn™ is part of our strongest and most advanced range of full synthetic engine oils. It is engineered with titanium technology to provide superior performance to your vehicle.

    As your car ages, its engine can lose performance and efficiency. Proper vehicle maintenance practice is critical to keeping an older engine performing at its best.

    FK Fukuoka ® GOLDSyn™ is boosted with extra fluid titanium technology to increase its film strength and reduce oil film breakdown and friction.


    Exceeds warranty of manufacturer’s requirements for applications requiring API SN.


    FK Fukuoka ® GOLDSyn™ provides maximum performance in vehicles with 100K+ kilometers. Boosted with titanium technology to increase its film strength and fight against power-robbing friction in higher mileage performance engines.
    • Maximize short and long term engine performance on high mileage engines.
    • Reduce leaks, oil burn off and power-robbing deposits.

    Typical Properties

    Name Method Units Typical Values
    Density at 15°C, Relative ASTM D1298 kg/m³ 0.856
    Appearance Visual Inspection - Bright & Clear
    Viscosity, Kinematic 100°C ASTM D445 mm²/s 14.78
    Flash Point ASTM D92 °C 254
    Pour Point ASTM D97 °C -37
    Viscosity, MRV / Yield Stress -30C (10W) ASTM D4684 mPa.s (cP) 27750
    Viscosity, Kinematic 40°C ASTM D445 mm²/s 91.40
    Viscosity Index ASTM D2270 None 159
    Noack Volatility ASTM D5800 % Loss 10.0
    Gelation Index ASTM D5133 - 8.0
    • When choosing oil, please refer to your owner’s handbook & the product Specifications shown below. May also be suitable for other vehicles.

    Product Performance Claims

    ACEAA3/B3, A3/B4
    API SN

    GOLDSyn 10W-40
    01 Dec 2018
    FK Fukuoka, the FK logo and related marks are trademarks of FK Fukuoka Limited, used under license.

    This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is made as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised to ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for the intended application and to comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should be consulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either MSB or its subsidiaries for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of the material. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you require any further information.

    MSB Machinery Corporation (M) Sdn. Bhd.
    No. 14 & 16, Jalan Banang 1,
    Taman Johoor, Johor Bahru,
    Johor, Malaysia, 81200
    Telephone: 607-23S9933
    Contact FK Fukuoka